Machine Model: MG-8DNC
Category: Paper Tube Polish Machine
Fully automatic paper tube surface grinding and polishing machine for seamless paper tubes, like strech film… Easy to use, worker only put the paper tube in the loading table and the finished tube will comes out auto, then pack.
Function of MG-8DNC Paper Tube Grinding and Polishing Machine
Adopt human-machine interface and specialized operation system, easier to operate;
Automatic tube loading, feeding and unloading, improving production efficiency and reducing cost;
Whole-closed mechanism, avoiding dust pollution, high level in paper tube machine;
Equipped with 8 abrasive bands from rough polish to fine polish, finishing polish work one-time;
Another 6 pcs belts adopting sanding belts or grinding belts after waxing, ensure better polishing.
Each polishing process is equipped with a dust collector, more cleaner;
Wax coating case in waxing device, waxing tube automatically;
Main bearing adopts NSK or SKF brands, for long-time using;
Loading Stand
Auto-loading table can 10pcs paper tube once. so it can free workers to do rest work.
Main Polish Part
Main polishing part is covered by a room construction, protect the dust goes out.
Dust Collection Device
Auot collection the dust when the polishing machine is running, keep the air clean.
Unloading Table
All the finished tubes will come to this table to pack.
TECHNICAL SHEET OF PAPER TUBE GRINDING AND POLISHING MACHINE
| Technical Item: | Value: |
|---|---|
| Inside Diameter: | 76-152 mm |
| Polish Group: | 8 Groups |
| Tube Length: | 1500~3000mm(standard) |
| Coating: | spray or shower coating |
| Total Power: | About 50 KW |
| Speed:: | 3-5 M/min |
| Feeding and Outing Mode:: | Auto |
| Polishing Mode: | Sand belt polish |
| Dust Cleaning Packed Group: | 1 SET |
| Size Adjustment (ID): | Motor-driven |
| Operators: | 1 Person |
| Overall Size: | 16500 x 5600 x 3250mm |
