Paper Tube Machine Category
With the increase in environmental protection, the paper products industry is slowly or rapidly developing. As a top supplier of paper tube machine in China, we also have the responsibility and obligation to provide customers with more stable quality, higher efficiency and less consumption paper core machine.
So far, the use of paper tubes has covered chemical fiber, industrial manufacturing, toilet paper, packaging cans, restaurants and other fields. In the future, there will be many plastic products that will continue to be replaced. It has been through 30 spring and autumn. Huanlong Machine, we hope to go along with customers to the future.
Full advantage machine especially for paper mile tube & film pipe, 4 drums can make tube more stable, faster and higher compression resistance. With high speed double knife cutting unit, the surface of tube can be very smooth, beautiful cutting edge.
3 Drum paper core winding machine can produce ID 12-76mm, thickness 1-12mm in high speed. with Multi-knife cutting unit, we can produce 150-1000mm length directly from the winder, by this way, it can save the labor from recutting the long tube again.
Our main model focus on paper core quality which can fullfill high compression resistance, stable paper reel gap distance. 4 Drum paper core winder basic can make 50mm – 200mm Inter-Diameter, 1-15 mm thickness, 1000-4000mm in length.
Professional high speed type in paper straw making, this machine can produce 45-50meter/min straw in stable running speed which can make it better efficiency and labor strength, with the cover around the cutting unit, it is safer for operator.
Configured with 2 drum header, which is suitable for producing 25-120mm ID paper tube, thickness range 1-10mm. As a common model, it is widely used in package tin, tea caddy, food cans, wine cans, fireworks tube, Air spinning, toilet paper… industry.
Design for big ID/thickness paper tube, suitable for 76-600mm paper tube ID, thickness range 1-20mm. Equip with big and strong arm, which can make the finished tube better than other type. 20mm is optional if customer needed.
Our new design cutting knife construction, can cut paper tube with very beautiful and reflect light edge, also less dust. Multi-knife design can be adjust cutting length very quickly, As long as the shortest 5second to change one knife position in specific location.
Equip with digital PLC control the servo motor, will drive the strong Cutting Knife, with high cutting length precision. Worker can easily use, control and change length by type into the touch screen the right parameter directly. Time is shorter to change diff ID mandrel.
Auto load and unload construction can reduce the labor cost, also make the cutting process more fast than ever. The recutter can equip with converyor, it can make the whole process totally automatic. Multi-knife structure is the key to save lots of time and cost.
It is design to deal with large output textile paper tube like DTY, air spinning… it is a half length mandrel character machine, which can make the unloading process after cut move smoothly. also easy to integrated with the finish process machine by conveyor.
Special design for small ID paper tube cutting, the ID can be from 6mm-40mm as standard, with auto-unloading function, operator can cut as many as possible in a hurry production requirement. Also very easy to change diff ID mandrels.
Equip with multi-knife set, HJQ-ENC is design for high output production, this machine can help lower storage of finished stock by raising up automatic paper tube cutting efficiency. blade holder is easily to handle, apply to variety of lengths adjustment.
Design for thickness lower than 5mm paper cores, equip with 6 blades as standard(customer can ask more when needed), which can cut multi-length in one time. also easy to change shaft/core ID by change the mandrel.
This model of slitter is the best seller type, which can slitte kraft paper, coreboard paper, thermal paper in 200meter/min speed. Equipped with mechanical arm, it is very easy to lift the jumbo roll by single button. Also slitter the entire roll in one time.
The highest speed can be 350 Meter/min, this paper slitting machine can easily operate by operate due to the gate style structure, workers can go into the middle of the machine whenever machine running or not. Also equip full auto lifting and unloading function.
The best paper slitting machine which can fulfill all customer need no matter in speed (can be 380 meter/min), or high range gsm paper weight from 60gsm to 600gsm, high strength construction make the work easy to be done in less time cost.
This production line is made of Textile Tube Cutting Machine + Conveyor Line + Surface Edge Polishing & Slotting Machine together, double station can deal with 2 pcs in one time. punch part can be added if required.
JB-C is a particular machine used for paper tube, like air spinning, DTY, paper can… to curling and polishing the edge into beautiful results. the speed can be 35-45 PCS/Min. Can be connected with conveyor line after cutting machine.
Fully automatic paper tube surface grinding and polishing machine for seamless paper tubes, like strech film… Easy to use, worker only put the paper tube in the loading table and the finished tube will comes out auto, then pack.
One mandrel seamless paper tube polishing and waxing machine, can make the paper core surface smooth and also apply wax to make it bright. great cost-effective when customer do not need thousand of meter per day.
Paper core edge polish machine, is used to grind and chamfer both ends of the paper core to a smooth and dust-free end surface. the core length can be 300-2500mm. apply wheel, easy to adjust the length.